Customizable Peg
GN009_Small

3D printed spike driven into the ground for holding a an object to the ground
{
  "Field Readiness ": "4",
  "User Manual": {
    "FR Portfolio": [
      "recaz0rEWiw28gPHB"
    ],
    "Part No._UM": "UM_GN009_Small",
    "Step 4 Text": "Tie the other end of the rope to object.",
    "What is your name?": "Aziz Wadi",
    "Step 1 Text": "Place the peg on the spike on the ground. Make sure that the angle to ground is 45-60 Deg and the U-shaped part is to ground side.",
    "Step 2 Text": "Using a small hammer (preferred rubber), hammer the peg into the ground until the U-shaped part tip touches the ground. ",
    "What is the date?": "2019-09-16",
    "What is your email address?": "aziz.wadi@fieldready.org",
    "Step 3 Text": "Insert rope (or any applicable tying mechanism) through the hole results from U-shaped part touching the ground. Make sure tension is in the opposite direction of angle between peg and ground."
  },
  "Notes": "Complete",
  "Materials": "ABS Plastic",
  "Qty produced": 1,
  "Maker": "Brynmor John",
  "Eng Dwg": [
    {
      "id": "attlkrlvjxBIUwtPM",
      "url": "https://dl.airtable.com/.attachments/a720f397932c2e5d07db1a28a8161b50/f323f440/GN009_Eng_Dwg_Small.PDF",
      "filename": "GN009_Eng_Dwg_Small.PDF",
      "size": 52888,
      "type": "application/pdf",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/a2f70eed8c06463b24205e3bfc65f4c3/e8bafdda",
          "width": 51,
          "height": 36
        },
        "large": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/64f65d2557512fa955c7e8b764cbe365/bc23528b",
          "width": 512,
          "height": 362
        }
      }
    },
    {
      "id": "attisQCnc1w7PRWJi",
      "url": "https://dl.airtable.com/.attachments/0d1da99af8642a411caaf9e074f2fbfc/ce16bd84/GN009_Eng_Dwg_Small.SLDDRW",
      "filename": "GN009_Eng_Dwg_Small.SLDDRW",
      "size": 206202,
      "type": "text/plain"
    }
  ],
  "Name": "Customizable Peg ",
  "Risk Assessment": [
    "rectRwrr27TyTLRUl"
  ],
  "Location": "UK",
  "Part No.": "GN009_Small",
  "Production cost (USD) Qty 1": 3.58,
  "Approved": "n/a",
  "In use Image": [
    {
      "id": "attqMzrQo4IOKte0h",
      "width": 323,
      "height": 281,
      "url": "https://dl.airtable.com/.attachments/1bf7a4f3749662e7fc0af6e0a22bf8d1/a9f5cca3/GN009_Image_Use.jpg",
      "filename": "GN009_Image_Use.jpg",
      "size": 63568,
      "type": "image/jpeg",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/486c291a1f415d7dd74cb616dd2ed3da/57fd1c33",
          "width": 41,
          "height": 36
        },
        "large": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/54fa5aab81eadeea59a1feab1c5acd5f/7bcd48b0",
          "width": 323,
          "height": 281
        },
        "full": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/6ed8c2a979e843290579e78068abffff/459a434f",
          "width": 3000,
          "height": 3000
        }
      }
    }
  ],
  "Production cost (USD) Qty 100": 358.44,
  "Maker Manual": {
    "MM_Part No.": "MM_GN009_Small",
    "Step 2 Text": "Open using a slicing software and prepare for 3D printing. Use printing settings below (settings may change for different 3D printer brands and filament manufacturers)\n\nLayer Height: 0.3 mm\nLine Width: 0.35 mm\n\nWall Thickness: 1.05 mm\nTop/Bottom Thickness: 1.2 mm\n\nInfill Density: 99%\nInfill Pattern: Strong 3D\n\nPrinting Temperature: 240 °C\nBuild Plate Temperature: 80 °C\nFlow: 100%\nEnable Retraction: Yes\nRetraction Distance: 6.5 mm\nRetraction Speed: 25 mm/s\n\nPrint Speed: 60 mm/s\n\nEnable Print Cooling: Yes\nFan Speed: 5%\n\nSupport: No\n\nBuild Plate Adhesion Type: Brim\nBrim Width: 1.75 mm",
    "What is your email address?": "aziz.wadi@fieldready.org",
    "What is your name?": "Aziz Wadi",
    "Step 4 Text": "If there is any, remove support and/or adhesion structure from printed part using a small cutter.",
    "Step 3 Image": [
      {
        "id": "attoSVFS97VR58Ho7",
        "width": 2521,
        "height": 972,
        "url": "https://dl.airtable.com/.attachments/3ce3989377668224d1af3ae5c2595b73/1e9053e6/GN009_Print_Position.png",
        "filename": "GN009_Print_Position.png",
        "size": 519720,
        "type": "image/png",
        "thumbnails": {
          "small": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/c19002dcfe163496e52dffcf9c1bb25f/e25b9406",
            "width": 93,
            "height": 36
          },
          "large": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/0cf7b3c536e3148fddf11588f82f7997/a26743f5",
            "width": 1328,
            "height": 512
          },
          "full": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/080c35a4fd5ddcb8aba103f61f4ed8d4/c69a3327",
            "width": 3000,
            "height": 3000
          }
        }
      }
    ],
    "Production time": "40 minutes",
    "FR Portfolio": [
      "recaz0rEWiw28gPHB"
    ],
    "Step 1": "Download the STL file from CAD files.",
    "Step 3 Text": "3D print product positioned as shown.",
    "Material used": "ABS filament",
    "Tools used": "3D slicing software\n3D printer",
    "Step 5 Text": "Consider using chemical treatments on the 3D-printed parts (acetone vapor) in order to remove the gaps between layers and smooth the surface.",
    "What is the date?": "2019-09-16"
  },
  "Version": 1,
  "Start Date ": "2014-06-26",
  "CAD": [
    {
      "id": "attiBOcBOhooo2dkB",
      "url": "https://dl.airtable.com/.attachments/6ac66f1501cf4529cd22520984a2f233/fdd8ca19/GN009_CAD.scad",
      "filename": "GN009_CAD.scad",
      "size": 2906,
      "type": "application/octet-stream"
    },
    {
      "id": "attWDUYlx8VlkTQrG",
      "url": "https://dl.airtable.com/.attachments/dfc0aa1e1e33631190bba5270b8044bd/ebbb063f/GN009_CAD_Small.SLDPRT",
      "filename": "GN009_CAD_Small.SLDPRT",
      "size": 190679,
      "type": "application/octet-stream"
    },
    {
      "id": "attzUyEWuDVxvBqhM",
      "url": "https://dl.airtable.com/.attachments/f013b4918c8e1995d875023b4008ea8a/5230fcdf/GN009_CAD_Small.stl",
      "filename": "GN009_CAD_Small.stl",
      "size": 75050,
      "type": "application/vnd.ms-pki.stl"
    }
  ],
  "OSHWA UID": "US000188",
  "Tech Readiness": "5",
  "End Date ": "2019-04-01",
  "BOM": [
    "recOKPyprNIhopzNJ"
  ],
  "Test Plan": [
    "recwT7ZjNPmZP3Uoe"
  ],
  "Catalogue Image": [
    {
      "id": "attOiJ3GYoK6lHkr6",
      "width": 2992,
      "height": 2992,
      "url": "https://dl.airtable.com/.attachments/ca2ae44ef293766363de79dfe280d69d/24ed4996/GN009_Catalog.JPG",
      "filename": "GN009_Image_Catalog.JPG",
      "size": 1867040,
      "type": "image/jpeg",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/12444beb8c700ab243536bb618f14349/57b99436",
          "width": 36,
          "height": 36
        },
        "large": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/0c796fc97978d8852b3297028413534f/07bb3815",
          "width": 512,
          "height": 512
        },
        "full": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/53f08241d1ad11f6e2e755da51fe9c9f/a5d88a28",
          "width": 3000,
          "height": 3000
        }
      }
    }
  ],
  "Production cost (USD) Qty 10": 35.84,
  "Critical Tool": "3D Printer",
  "Licence": "CC-BY-4.0",
  "User Readiness": "5",
  "RPN (Highest)": 16,
  "Open Hardware Licence": "CERN",
  "OSHWA Certification": "2019-12-15",
  "Production time (1 unit by 1 person)": "<1 hour",
  "Email": "brynmor.john@fieldready.org",
  "CAD Image": [
    {
      "id": "attJk0AqS4GbAmFnQ",
      "width": 628,
      "height": 472,
      "url": "https://dl.airtable.com/.attachments/04d092a50489151cda1d6fbc82c66495/ad25e60f/GN009_Image_CAD.jpg",
      "filename": "GN009_Image_CAD.jpg",
      "size": 41331,
      "type": "image/jpeg",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/c4219b413fde1ce768bff4b23a847e68/f181af42",
          "width": 48,
          "height": 36
        },
        "large": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/ce4b58e0bb6e5f3d645c16a3406b2e0b/93ba6299",
          "width": 628,
          "height": 472
        },
        "full": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/7bae4f7eb1ffef9588d96cf023143588/ec3f1766",
          "width": 3000,
          "height": 3000
        }
      }
    }
  ],
  "Risk Readiness": "5",
  "Description": "3D printed spike driven into the ground for holding a an object to the ground",
  "Designer": "Fryns Ballerup",
  "Maker Readiness": "4",
  "FAI": [
    "recyN4Bvvh6Nnj5lx"
  ],
  "images": [
    {
      "original": "/images/GN009_Small-attOiJ3GYoK6lHkr6-400x300.jpg",
      "thumbnail": "/images/GN009_Small-attOiJ3GYoK6lHkr6-400x300.jpg",
      "projectCard": "/images/GN009_Small-attOiJ3GYoK6lHkr6-290x200.jpg",
      "fullscreen": "https://dl.airtable.com/.attachments/ca2ae44ef293766363de79dfe280d69d/24ed4996/GN009_Catalog.JPG"
    },
    {
      "original": "/images/GN009_Small-attqMzrQo4IOKte0h-400x300.jpg",
      "thumbnail": "/images/GN009_Small-attqMzrQo4IOKte0h-400x300.jpg",
      "projectCard": "/images/GN009_Small-attqMzrQo4IOKte0h-290x200.jpg",
      "fullscreen": "https://dl.airtable.com/.attachments/1bf7a4f3749662e7fc0af6e0a22bf8d1/a9f5cca3/GN009_Image_Use.jpg"
    },
    {
      "original": "/images/GN009_Small-attJk0AqS4GbAmFnQ-400x300.jpg",
      "thumbnail": "/images/GN009_Small-attJk0AqS4GbAmFnQ-400x300.jpg",
      "projectCard": "/images/GN009_Small-attJk0AqS4GbAmFnQ-290x200.jpg",
      "fullscreen": "https://dl.airtable.com/.attachments/04d092a50489151cda1d6fbc82c66495/ad25e60f/GN009_Image_CAD.jpg"
    }
  ]
}