Projects >
Connector NebulizerHL007
This piece is a connector for air tubes developed to fix a nebulizer problem
Engineering Drawings
{
"Field Readiness ": "5",
"User Manual": {
"FR Portfolio": [
"recOO23fCDuTiRLcx"
],
"Part No._UM": "UM_HL007",
"Step 4 Text": "Connect the inside flexible to the new connector and screw the nebulizer cover back",
"What is your name?": "Aziz Wadi",
"Step 1 Text": "Disconnect the nebulizer compressor from electrical supply and unscrew the top cover to show the nebulizer casing.",
"Step 2 Text": "Drill a hole (10 mm-12 mm) in a proper place inside the casing to route the flexible hose into the new connector.",
"What is the date?": "2019-10-22",
"What is your email address?": "aziz.wadi@fieldready.org",
"Step 3 Text": "Insert the threaded side of the new connector from outside the casing and tie firmly using a nut"
},
"Maker Manual [REF]": [
{
"id": "attydKfxrkXpBWRIa",
"url": "https://dl.airtable.com/.attachments/ad8a9e54f834e95b34d97fd7ed40a2b4/7dcc9d1b/HL007_Manual.pptx",
"filename": "HL007_Manual.pptx",
"size": 908254,
"type": "application/vnd.openxmlformats-officedocument.presentationml.presentation",
"thumbnails": {
"small": {
"url": "https://dl.airtable.com/attydKfxrkXpBWRIa-87b8219b0b7e8147-32x32.jpg",
"width": 32,
"height": 32
},
"large": {
"url": "https://dl.airtable.com/attydKfxrkXpBWRIa-275d783c0e4f98cc-320x221.jpg",
"width": 320,
"height": 221
}
}
}
],
"Notes": "Complete",
"Materials": "ABS Plastic",
"Maker": "Raphael Fanti",
"Eng Dwg": [
{
"id": "att0s4xEhBcj1difz",
"url": "https://dl.airtable.com/.attachments/b7ea2b7daacf88dac1c75f9bb9845860/2700d2e5/HL007_Eng_Dwg.PDF",
"filename": "HL007_Eng_Dwg.PDF",
"size": 72114,
"type": "application/pdf",
"thumbnails": {
"small": {
"url": "https://dl.airtable.com/.attachmentThumbnails/6854839f2eb7d518bbf9ef2df3c8b338/938bc4c9",
"width": 51,
"height": 36
},
"large": {
"url": "https://dl.airtable.com/.attachmentThumbnails/d5a6420ff7930f4ced2e7b7715bf4ba3/65e71461",
"width": 512,
"height": 362
}
}
},
{
"id": "attfh7Hdiz3irCB0l",
"url": "https://dl.airtable.com/.attachments/326bb2cbbc86c8e30028063785e5dc54/d30d9708/HL007_Eng_Dwg.SLDDRW",
"filename": "HL007_Eng_Dwg.SLDDRW",
"size": 5628009,
"type": "text/plain"
}
],
"Name": "Connector Nebulizer ",
"Risk Assessment": [
"recgHx3LFNSWJ2m14"
],
"Location": "Haiti ",
"Part No.": "HL007",
"Production cost (USD) Qty 1": 2.94,
"Approved": "n/a",
"In use Image": [
{
"id": "attQ2ZNZP2Ewq3Yyw",
"width": 638,
"height": 565,
"url": "https://dl.airtable.com/.attachments/d00401f590f9f9981c09e2a117c8aec0/b42d1dbd/HL007_Image_Use.jpg",
"filename": "HL007_Image_Use.jpg",
"size": 56509,
"type": "image/jpeg",
"thumbnails": {
"small": {
"url": "https://dl.airtable.com/.attachmentThumbnails/b899280e7706f7a44b4e464cff19e472/55e5b63d",
"width": 41,
"height": 36
},
"large": {
"url": "https://dl.airtable.com/.attachmentThumbnails/bbce6a81bd1a9ffd92699cabd98606b9/1e3050a7",
"width": 578,
"height": 512
},
"full": {
"url": "https://dl.airtable.com/.attachmentThumbnails/1c7e02c337cb5fab43752399d8470a58/e6958231",
"width": 3000,
"height": 3000
}
}
}
],
"Production cost (USD) Qty 100": 294.01,
"Maker Manual": {
"MM_Part No.": "MM_HL007",
"Step 2 Text": "Open using a slicing software and prepare for 3D printing. Use printing settings below (settings may change for different 3D printer brands and filament manufacturers)\n\nLayer Height: 0.20 mm\nLine Width: 0.35 mm\n\nWall Thickness: 1.05 mm\nTop/Bottom Thickness: 1.0 mm\n\nInfill Density: 99%\nInfill Pattern: Strong 3D\n\nPrinting Temperature: 240 °C\nBuild Plate Temperature: 80 °C\nFlow: 100%\nEnable Retraction: Yes\nRetraction Distance: 6.5 mm\nRetraction Speed: 25 mm/s\n\nPrint Speed: 60 mm/s\n\nEnable Print Cooling: Yes\nFan Speed: 5%\n\nSupport: Yes\nSupport Placement: Touching Buildplate\nSupport Overhang Angel: 60°\n\nBuild Plate Adhesion Type: None",
"What is your email address?": "aziz.wadi@fieldready.org",
"What is your name?": "Aziz Wadi",
"Step 4 Text": "If there is any, remove support and/or adhesion structure from printed part using a small cutter.",
"Step 3 Image": [
{
"id": "attYSTm2uCbxjtZtO",
"width": 2395,
"height": 906,
"url": "https://dl.airtable.com/.attachments/0ff91a43a87b75c8ae89a9ed4aaf1e8c/31759a58/HL007_Print_Position.png",
"filename": "HL007_Print_Position.png",
"size": 775229,
"type": "image/png",
"thumbnails": {
"small": {
"url": "https://dl.airtable.com/.attachmentThumbnails/eadc8917bf52e5ba0e0bc260d20891fa/f24b3299",
"width": 95,
"height": 36
},
"large": {
"url": "https://dl.airtable.com/.attachmentThumbnails/62f5195c13515a5ca38d8476eda2081d/8dccf8eb",
"width": 1353,
"height": 512
},
"full": {
"url": "https://dl.airtable.com/.attachmentThumbnails/bf89c9b7092f5e69049b756e132a76fe/eadfc67b",
"width": 3000,
"height": 3000
}
}
}
],
"Production time": "30 minutes",
"FR Portfolio": [
"recOO23fCDuTiRLcx"
],
"Step 1": "Download the STL file from CAD files.",
"Step 3 Text": "3D print product positioned as shown.",
"Material used": "ABS filament",
"Tools used": "3D slicing software\n3D printer",
"Step 5 Text": "Consider using chemical treatments on the 3D-printed parts (Acetone vapor) in order to remove the gaps between layers and smooth the surface.",
"What is the date?": "2019-10-22"
},
"Version": 1,
"Start Date ": "2016-03-11",
"CAD": [
{
"id": "attnd5To26GdTjLTM",
"url": "https://dl.airtable.com/.attachments/c1ba2a8eb93506e1f36c02d9e39f55b7/05ab7aab/HL007_CAD.scad",
"filename": "HL007_CAD.scad",
"size": 15461,
"type": "application/octet-stream"
},
{
"id": "atttBiA0mtDtW1wDi",
"url": "https://dl.airtable.com/.attachments/c4920fd8ff982182be242475775c6d76/252a9fca/HL007_CAD.stl",
"filename": "HL007_CAD.stl",
"size": 4089007,
"type": "application/vnd.ms-pki.stl"
},
{
"id": "attA7TKKVPOyNcHXf",
"url": "https://dl.airtable.com/.attachments/94e0e641d7684d247a5e008f1e443e3b/d88d86e2/HL007_CAD.SLDPRT",
"filename": "HL007_CAD.SLDPRT",
"size": 6793538,
"type": "application/octet-stream"
}
],
"OSHWA UID": "US000209",
"Tech Readiness": "3",
"End Date ": "2016-03-11",
"BOM": [
"recWyuS2nkZTPaORW"
],
"Test Plan": [
"rec20fGuFF3t8e8rZ"
],
"Catalogue Image": [
{
"id": "attEvALFdGdCd6k6x",
"width": 2992,
"height": 2992,
"url": "https://dl.airtable.com/.attachments/0b281e425704da8cee2a913f36e54091/ab387e19/HL007_Image_Catalogue.JPG",
"filename": "HL007_Image_Catalogue.JPG",
"size": 1717249,
"type": "image/jpeg",
"thumbnails": {
"small": {
"url": "https://dl.airtable.com/.attachmentThumbnails/3dcd5bde003b906665f17bcd1b63fc38/bb8a52ce",
"width": 36,
"height": 36
},
"large": {
"url": "https://dl.airtable.com/.attachmentThumbnails/adad15c43c846692eedc1b006fb1e69e/1da9824d",
"width": 512,
"height": 512
},
"full": {
"url": "https://dl.airtable.com/.attachmentThumbnails/c6c90f10c4aa2356cdf648ca563c0a6e/d5b90fd7",
"width": 3000,
"height": 3000
}
}
}
],
"Production cost (USD) Qty 10": 29.4,
"Critical Tool": "3D Printer",
"Download Link": "http://www.thingiverse.com/thing:1409472",
"Licence": "CC-BY-4.0",
"User Readiness": "4",
"RPN (Highest)": 9,
"Open Hardware Licence": "CERN",
"OSHWA Certification": "2020-01-03",
"Production time (1 unit by 1 person)": "<1 hour",
"CAD Image": [
{
"id": "attcwLoRDfBFJIu7f",
"width": 2357,
"height": 1494,
"url": "https://dl.airtable.com/.attachments/d736c128cc46c497b07c5f01167f4415/04e6db67/HL007_Image_CAD.jpg",
"filename": "HL007_Image_CAD.jpg",
"size": 231995,
"type": "image/jpeg",
"thumbnails": {
"small": {
"url": "https://dl.airtable.com/.attachmentThumbnails/dc8352a27217bbe6a270969d0e3faed9/2465f023",
"width": 57,
"height": 36
},
"large": {
"url": "https://dl.airtable.com/.attachmentThumbnails/4da5ee1fe7235441af3ff926c28dd83a/d83e0a89",
"width": 808,
"height": 512
},
"full": {
"url": "https://dl.airtable.com/.attachmentThumbnails/c456071d43dce3b367c8144c92e20c5a/21477a92",
"width": 3000,
"height": 3000
}
}
}
],
"Risk Readiness": "4",
"Description": "This piece is a connector for air tubes developed to fix a nebulizer problem",
"Designer": "Raphael Fanti",
"Maker Readiness": "4",
"FAI": [
"rect5KWgTYtUUSTdi"
],
"images": [
{
"original": "/images/HL007-attEvALFdGdCd6k6x-400x300.jpg",
"thumbnail": "/images/HL007-attEvALFdGdCd6k6x-400x300.jpg",
"projectCard": "/images/HL007-attEvALFdGdCd6k6x-290x200.jpg",
"fullscreen": "https://dl.airtable.com/.attachments/0b281e425704da8cee2a913f36e54091/ab387e19/HL007_Image_Catalogue.JPG"
},
{
"original": "/images/HL007-attQ2ZNZP2Ewq3Yyw-400x300.jpg",
"thumbnail": "/images/HL007-attQ2ZNZP2Ewq3Yyw-400x300.jpg",
"projectCard": "/images/HL007-attQ2ZNZP2Ewq3Yyw-290x200.jpg",
"fullscreen": "https://dl.airtable.com/.attachments/d00401f590f9f9981c09e2a117c8aec0/b42d1dbd/HL007_Image_Use.jpg"
},
{
"original": "/images/HL007-attcwLoRDfBFJIu7f-400x300.jpg",
"thumbnail": "/images/HL007-attcwLoRDfBFJIu7f-400x300.jpg",
"projectCard": "/images/HL007-attcwLoRDfBFJIu7f-290x200.jpg",
"fullscreen": "https://dl.airtable.com/.attachments/d736c128cc46c497b07c5f01167f4415/04e6db67/HL007_Image_CAD.jpg"
}
]
}