Nebulizer T Fitting
HL012

This is a fitting to allow other gases to be mixed into a nebulizer supply
{
  "Field Readiness ": "5",
  "User Manual": {
    "FR Portfolio": [
      "recqMUH0eqOWa8ZWX"
    ],
    "Part No._UM": "UM_HL012",
    "What is your name?": "Aziz Wadi",
    "Step 1 Text": "Sterilize If possible, test a trial print for air tightness.",
    "Step 2 Text": "Connect gases to be mixed supplies into item inputs.",
    "What is the date?": "2020-02-13",
    "What is your email address?": "aziz.wadi@fieldready.org",
    "Step 3 Text": "Supply mixed gases from item outputs."
  },
  "Notes": "Complete\n",
  "Materials": "ABS Plastic",
  "Maker": "Mark Mellors",
  "Eng Dwg": [
    {
      "id": "attivj3TrOHOBu9O9",
      "url": "https://dl.airtable.com/.attachments/693c82b3a8a243237de4041a877c2f45/379ad12f/HL012_Eng_Dwg.PDF",
      "filename": "HL012_Eng_Dwg.PDF",
      "size": 77664,
      "type": "application/pdf",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/79e3eb1f7fff3a61cf10f9b7b18a8fae/fd6f57db",
          "width": 51,
          "height": 36
        },
        "large": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/1802d64be94a54166358f11d0684533d/f04e3d90",
          "width": 512,
          "height": 362
        }
      }
    },
    {
      "id": "attVWudePKvUJIB91",
      "url": "https://dl.airtable.com/.attachments/2caf4afcbc8c369626c70f4a255b8f1b/2da378e7/HL012_Eng_Dwg.SLDDRW",
      "filename": "HL012_Eng_Dwg.SLDDRW",
      "size": 221309,
      "type": "text/plain"
    }
  ],
  "Name": "Nebulizer T Fitting ",
  "Risk Assessment": [
    "recGmUxQ1zU5SxNgp"
  ],
  "Location": "Haiti ",
  "Part No.": "HL012",
  "Production cost (USD) Qty 1": 10.7,
  "Approved": "n/a",
  "In use Image": [
    {
      "id": "attm28swG8kgBly81",
      "width": 628,
      "height": 472,
      "url": "https://dl.airtable.com/.attachments/a9dbe62040d372f4a54bb3c0154799f9/d94f8a50/HL012_Image_Use.JPG",
      "filename": "HL012_Image_Use.JPG",
      "size": 20262,
      "type": "image/jpeg",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/2d6f841910c1b7165a862ea902d223ce/0911971d",
          "width": 48,
          "height": 36
        },
        "large": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/d3e3ade912c7b7506758b1144cc108f3/33125c49",
          "width": 628,
          "height": 472
        },
        "full": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/4692ff6b93eb0777965ecc77fdac3b96/3eb29736",
          "width": 3000,
          "height": 3000
        }
      }
    }
  ],
  "Production cost (USD) Qty 100": 1070,
  "Maker Manual": {
    "MM_Part No.": "MM_HL012",
    "Step 2 Text": "Open using a slicing software and prepare for 3D printing. Use printing settings below (settings may change for different 3D printer brands and filament manufacturers)\n\nLayer Height: 0.20 mm\nLine Width: 0.35 mm\n\nWall Thickness: 1.05 mm\nTop/Bottom Thickness: 1.0 mm\n\nInfill Density: 99%\nInfill Pattern: Strong 3D\n\nPrinting Temperature: 240°C\nBuild Plate Temperature: 80 °C\nFlow: 100%\nEnable Retraction: Yes\nRetraction Distance: 6.5 mm\nRetraction Speed: 25 mm/s\n\nPrint Speed: 60 mm/s\n\nEnable Print Cooling: Yes\nFan Speed: 5%\n\nSupport: Yes\nSupport Placement: Everywhere\nSupport Overhang Angel: 60°\n\nBuild Plate Adhesion Type: Brim",
    "What is your email address?": "aziz.wadi@fieldready.org",
    "What is your name?": "Aziz Wadi",
    "Step 4 Text": "If there is any, remove support and/or adhesion structure from printed part using a small cutter.",
    "Step 3 Image": [
      {
        "id": "attt09hPIADTBavjz",
        "width": 1207,
        "height": 459,
        "url": "https://dl.airtable.com/.attachments/c2df9963fdf1cacfb9f71a7462be046a/15a7f96a/HL012_Position_Image.png",
        "filename": "HL012_Position_Image.png",
        "size": 297467,
        "type": "image/png",
        "thumbnails": {
          "small": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/e4504bce23de998355e83fba6961cb78/200c09a3",
            "width": 95,
            "height": 36
          },
          "large": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/66f9a99e767bbf354e49e55a43b9800c/9c0a62eb",
            "width": 1207,
            "height": 459
          },
          "full": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/b49fb8a738de41e99e7b1d7971cb5a73/97a314de",
            "width": 3000,
            "height": 3000
          }
        }
      }
    ],
    "Production time": "180 minutes",
    "FR Portfolio": [
      "recqMUH0eqOWa8ZWX"
    ],
    "Step 1": "Download the STL file from CAD files.",
    "Step 3 Text": "3D print product positioned as shown.",
    "Material used": "ABS filament",
    "Tools used": "3D slicing software\n3D printer",
    "Step 5 Text": "Consider using chemical treatments on the 3D-printed parts (Acetone vapor) in order to remove the gaps between layers and smooth the surface.",
    "What is the date?": "2020-02-13"
  },
  "Version": 10,
  "Start Date ": "2016-05-13",
  "CAD": [
    {
      "id": "att6roacfVFUQ4kHM",
      "url": "https://dl.airtable.com/.attachments/1566280f2d133a8e53f9214c04407722/52b0fce0/HL012_CAD.SLDPRT",
      "filename": "HL012_CAD.SLDPRT",
      "size": 578048,
      "type": "application/octet-stream"
    },
    {
      "id": "att6J4FQzuhvtzHp4",
      "url": "https://dl.airtable.com/.attachments/9a3cb024a6c6a6d6aab950e85395be56/992d4d18/HL012_CAD.STL",
      "filename": "HL012_CAD.STL",
      "size": 3790641,
      "type": "application/octet-stream"
    }
  ],
  "OSHWA UID": "US000224",
  "Tech Readiness": "3",
  "End Date ": "2016-05-13",
  "BOM": [
    "recVXIr5wuOaIkwyD"
  ],
  "Test Plan": [
    "recK12MvTaQ34iyhe"
  ],
  "Catalogue Image": [
    {
      "id": "attOwPVHFDXAX8ArT",
      "width": 2992,
      "height": 2992,
      "url": "https://dl.airtable.com/.attachments/f07a8718887d877ac976015a8e85a266/9d7fff82/HL012_Image_Catalogue.JPG",
      "filename": "HL012_Image_Catalogue.JPG",
      "size": 1524747,
      "type": "image/jpeg",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/526d683aaf11a3eb34a8d591e1ce8866/13b8dcb0",
          "width": 36,
          "height": 36
        },
        "large": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/7b89d01c7799fe7dfab117ef22ff61f5/66c1fa90",
          "width": 512,
          "height": 512
        },
        "full": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/dfa012ed3da449f4f12963dd8fa66508/a75e5e4f",
          "width": 3000,
          "height": 3000
        }
      }
    }
  ],
  "Production cost (USD) Qty 10": 107,
  "Critical Tool": "3D Printer",
  "Download Link": "http://www.thingiverse.com/thing:1562031",
  "Licence": "CC-BY-4.0",
  "User Readiness": "4",
  "RPN (Highest)": 9,
  "Open Hardware Licence": "CERN",
  "OSHWA Certification": "2020-02-16",
  "Production time (1 unit by 1 person)": "2-3 hours",
  "CAD Image": [
    {
      "id": "attlwgX5KI8leTtFo",
      "width": 628,
      "height": 472,
      "url": "https://dl.airtable.com/.attachments/83e0885c6aa93bc8384f4b2962c68605/db4cad9c/HL012_Image_CAD.jpg",
      "filename": "HL012_Image_CAD.jpg",
      "size": 43656,
      "type": "image/jpeg",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/a202947734d700b4db994eb8c2cd3143/f7e6c066",
          "width": 48,
          "height": 36
        },
        "large": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/b8b36db8dcd4c97c441b21b4c7909590/d9b4dea9",
          "width": 628,
          "height": 472
        },
        "full": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/1cc6a8654db25a16a150ed2f681d96b5/02d18621",
          "width": 3000,
          "height": 3000
        }
      }
    }
  ],
  "Risk Readiness": "4",
  "Description": "This is a fitting to allow other gases to be mixed into a nebulizer supply",
  "Designer": "Mark Mellors",
  "Maker Readiness": "4",
  "FAI": [
    "recH9b09BvJANcMFG"
  ],
  "Catalogue Notes": "Size: 2.8 cm x 6.3 cm x 6.5 cm\n\nUsage Notes: Sterilize If possible, test a trial print for airtightness. A simple method to do this is to install the fitting in place with a gas supply but block off the outlet with tape. Then apply liquid soap to the outside. If you see bubbles, the print is porous. Try changing the print settings (hotter, more extrusion) or apply an acetone or lacquer treatment. Ensure that any treatments are fully dry before retesting or use.\n",
  "images": [
    {
      "original": "/images/HL012-attOwPVHFDXAX8ArT-400x300.jpg",
      "thumbnail": "/images/HL012-attOwPVHFDXAX8ArT-400x300.jpg",
      "projectCard": "/images/HL012-attOwPVHFDXAX8ArT-290x200.jpg",
      "fullscreen": "https://dl.airtable.com/.attachments/f07a8718887d877ac976015a8e85a266/9d7fff82/HL012_Image_Catalogue.JPG"
    },
    {
      "original": "/images/HL012-attm28swG8kgBly81-400x300.jpg",
      "thumbnail": "/images/HL012-attm28swG8kgBly81-400x300.jpg",
      "projectCard": "/images/HL012-attm28swG8kgBly81-290x200.jpg",
      "fullscreen": "https://dl.airtable.com/.attachments/a9dbe62040d372f4a54bb3c0154799f9/d94f8a50/HL012_Image_Use.JPG"
    },
    {
      "original": "/images/HL012-attlwgX5KI8leTtFo-400x300.jpg",
      "thumbnail": "/images/HL012-attlwgX5KI8leTtFo-400x300.jpg",
      "projectCard": "/images/HL012-attlwgX5KI8leTtFo-290x200.jpg",
      "fullscreen": "https://dl.airtable.com/.attachments/83e0885c6aa93bc8384f4b2962c68605/db4cad9c/HL012_Image_CAD.jpg"
    }
  ]
}