Pipe Grip
WA003

Tightens interlocking threaded collars onto a a water input hose for a compressor
{
  "Field Readiness ": "5",
  "User Manual": {
    "Step 1 Image": [
      {
        "id": "attQWPS4UI98yUgPu",
        "width": 603,
        "height": 451,
        "url": "https://dl.airtable.com/.attachments/6c684602b62f199c251fd39ceb26da11/351de012/1.png",
        "filename": "1.png",
        "size": 556114,
        "type": "image/png",
        "thumbnails": {
          "small": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/19d1552c3d2340a2376f06cc449ecd1e/f112c5b5",
            "width": 48,
            "height": 36
          },
          "large": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/47cc54376bfeead345880b3b1b48099d/05a6f377",
            "width": 603,
            "height": 451
          },
          "full": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/30ca845918eb90953a7b312f0ea4699e/b284db30",
            "width": 3000,
            "height": 3000
          }
        }
      }
    ],
    "FR Portfolio": [
      "recg8nyX5MTuNZq6Z"
    ],
    "Part No._UM": "UM_WA003",
    "Step 4 Text": "Slide the pipe grip into the outer part of the collet and tighten the collet onto the hose.",
    "Step 2 Image": [
      {
        "id": "attm2WM1oTEgzJ5ZZ",
        "width": 603,
        "height": 451,
        "url": "https://dl.airtable.com/.attachments/625982b015fd5dbd36505a58e2b1b25d/eb655a15/2.png",
        "filename": "2.png",
        "size": 433301,
        "type": "image/png",
        "thumbnails": {
          "small": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/fba5b31915cec76c468b2e88e1066ebf/25aef1fe",
            "width": 48,
            "height": 36
          },
          "large": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/2e300d7f0afd2ede30df4218fc960a56/199cee80",
            "width": 603,
            "height": 451
          },
          "full": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/13fe8aa391b1ca82ea1d1dd89572b9ea/93949bcf",
            "width": 3000,
            "height": 3000
          }
        }
      }
    ],
    "What is your name?": "Aziz Wadi",
    "Step 1 Text": "Loosen the collet holding the hose and pull the hose/pipe grip out of the collet.",
    "Step 4 Image": [
      {
        "id": "attlEpwg7MBh3LwpG",
        "width": 603,
        "height": 451,
        "url": "https://dl.airtable.com/.attachments/dd95902f95dfabe0fc247da1a9f7907f/8c23c6c0/4.png",
        "filename": "4.png",
        "size": 424727,
        "type": "image/png",
        "thumbnails": {
          "small": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/3f1f266aa78c433db0e944bb83d06e98/185ffcc7",
            "width": 48,
            "height": 36
          },
          "large": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/e79b4500eceb0e79dc3c0cd51b1309f5/3e752a67",
            "width": 603,
            "height": 451
          },
          "full": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/83db28657413d965f8ce5ed53771a293/a79fc5e6",
            "width": 3000,
            "height": 3000
          }
        }
      }
    ],
    "Step 2 Text": "Remove the old pipe grip.",
    "Step 3 Image": [
      {
        "id": "attrDJm5gDL3ywEUs",
        "width": 603,
        "height": 451,
        "url": "https://dl.airtable.com/.attachments/4f08c1bb78d68f0f7b32ae3064ea6149/6166ab08/3.png",
        "filename": "3.png",
        "size": 426881,
        "type": "image/png",
        "thumbnails": {
          "small": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/ce1bece8e792b0a654feda7b017099b7/74452ddf",
            "width": 48,
            "height": 36
          },
          "large": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/4209ecdedce8cd8819cadadd11151654/aea5a703",
            "width": 603,
            "height": 451
          },
          "full": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/b2e0edea9f72ee509557a32527f8cd03/50f7a9f3",
            "width": 3000,
            "height": 3000
          }
        }
      }
    ],
    "What is the date?": "2019-08-20",
    "What is your email address?": "aziz.wadi@fieldready.org",
    "Step 3 Text": "Place the old grip onto the hose while bending each end of the “C” of the pipe grip so that the parallel ridges of the pipe grip are offset from one another at each end of the C, forming a thread of sorts."
  },
  "Maker Manual [REF]": [
    {
      "id": "atttJrsOXfetRXqDn",
      "url": "https://dl.airtable.com/.attachments/db1da72eed6e50c61031d60925e26f74/a2205559/WA003_Manual.docx",
      "filename": "WA003_Manual.docx",
      "size": 1658626,
      "type": "application/vnd.openxmlformats-officedocument.wordprocessingml.document",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/atttJrsOXfetRXqDn-a4b566daaf479cf5-32x32.jpg",
          "width": 32,
          "height": 32
        },
        "large": {
          "url": "https://dl.airtable.com/atttJrsOXfetRXqDn-06225472a6603051-226x320.jpg",
          "width": 226,
          "height": 320
        }
      }
    }
  ],
  "Notes": "Complete",
  "Materials": "ABS plastic ",
  "Qty produced": 1,
  "Maker": "Ben Savonen",
  "Eng Dwg": [
    {
      "id": "attwB9l5RXBXW4qrh",
      "url": "https://dl.airtable.com/.attachments/126b3fdc27b87a6b3a5c20bcf27bb858/bb01a382/WA003_Eng_Dwg.SLDDRW",
      "filename": "WA003_Eng_Dwg.SLDDRW",
      "size": 205871,
      "type": "application/octet-stream"
    },
    {
      "id": "attiNfb6twegr1rlI",
      "url": "https://dl.airtable.com/.attachments/c966e9ceabede56ab685aba5fe5c7805/db026867/WA003_Eng_Dwg.PDF",
      "filename": "WA003_Eng_Dwg.PDF",
      "size": 46755,
      "type": "application/pdf",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/d0799690e4979a6809267512b2d9c329/7d734552",
          "width": 51,
          "height": 36
        },
        "large": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/38677d9d624887c0c981450905e5af7e/606b2ffb",
          "width": 512,
          "height": 362
        }
      }
    }
  ],
  "Name": "Pipe Grip",
  "Risk Assessment": [
    "recLlteagIrRWFuqp"
  ],
  "Location": "South Sudan",
  "Part No.": "WA003",
  "Production cost (USD) Qty 1": 18.71,
  "Approved": "n/a",
  "In use Image": [
    {
      "id": "attjOqZ8rFwxhBcwN",
      "width": 1379,
      "height": 1034,
      "url": "https://dl.airtable.com/.attachments/7f3298d64d34957dc5f27632d8a440a4/5321e1ff/WA003_Image_Use.jpg",
      "filename": "WA003_Image_Use.jpg",
      "size": 324262,
      "type": "image/jpeg",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/10279618ff020de869595bdecab40860/19dc660f",
          "width": 48,
          "height": 36
        },
        "large": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/23351f966d4956240f4bce89303ea580/c251716a",
          "width": 683,
          "height": 512
        },
        "full": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/3705eff824e9be0678c67272572d1ad8/d1134474",
          "width": 3000,
          "height": 3000
        }
      }
    }
  ],
  "Production cost (USD) Qty 100": 756.98,
  "Maker Manual": {
    "MM_Part No.": "MM_WA003",
    "Step 2 Text": "Open using a slicing software and prepare for 3D printing. Use printing settings below (settings may change for different 3D printer brands and filament manufacturers)\n\nLayer Height: 0.2 mm\nLine Width: 0.35 mm\n\nWall Thickness: 1.05 mm\nTop/Bottom Thickness: 1.0 mm\n\nInfill Density: 99%\nInfill Pattern: Flexible 3D\n\nPrinting Temperature: 240 °C\nBuild Plate Temperature: 80 °C\nFlow: 100%\nEnable Retraction: Yes\nRetraction Distance: 6.5 mm\nRetraction Speed: 25 mm/s\n\nPrint Speed: 60 mm/s\n\nEnable Print Cooling: Yes\nFan Speed: 5%\n\nSupport: No\n\nBuild Plate Adhesion Type: None",
    "What is your email address?": "aziz.wadi@fieldready.org",
    "What is your name?": "Aziz Wadi",
    "Step 4 Text": "If there is any, remove support and/or adhesion structure from printed part using a small cutter.",
    "Step 3 Image": [
      {
        "id": "att3doDPmGympNsmG",
        "width": 2464,
        "height": 811,
        "url": "https://dl.airtable.com/.attachments/b5e745faa73be3ca43c76c7e374c337b/77494367/WA003_Print_Position.png",
        "filename": "WA003_Print_Position.png",
        "size": 742043,
        "type": "image/png",
        "thumbnails": {
          "small": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/8ad33e3825df007d04b67d7b6e4c5512/a8548057",
            "width": 109,
            "height": 36
          },
          "large": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/f96fd22eaf1d8156a324ce5b75a2e5ec/3e1e7afe",
            "width": 1556,
            "height": 512
          },
          "full": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/56163c9d0e056737111674aad185007f/5e13906d",
            "width": 3000,
            "height": 3000
          }
        }
      }
    ],
    "Production time": "110 minutes",
    "FR Portfolio": [
      "recg8nyX5MTuNZq6Z"
    ],
    "Step 1": "Download the STL file from CAD files.",
    "Step 3 Text": "3D print product positioned as shown.",
    "Material used": "ABS filament",
    "Tools used": "3D slicing software\n3D printer",
    "Step 5 Text": "Consider using chemical treatments on the 3D-printed parts (Acetone vapor) in order to remove the gaps between layers and smooth the surface.",
    "What is the date?": "2019-08-20"
  },
  "Version": 2,
  "Start Date ": "2018-08-02",
  "CAD": [
    {
      "id": "attnfzk1JhPe96MU7",
      "url": "https://dl.airtable.com/.attachments/72453ac51f67f6e48b3b98926c66f0e9/862ebc44/WA003_CAD.SLDPRT",
      "filename": "WA003_CAD.SLDPRT",
      "size": 241819,
      "type": "application/octet-stream"
    },
    {
      "id": "attuHTmbTuunolWSr",
      "url": "https://dl.airtable.com/.attachments/0ff08d952d47502d58c627bde2143631/d5c4566e/WA003_CAD.STL",
      "filename": "WA003_CAD.STL",
      "size": 94784,
      "type": "application/octet-stream"
    }
  ],
  "OSHWA UID": "US000174",
  "Tech Readiness": "5",
  "End Date ": "2018-08-02",
  "Risk Assessment [REF]": [
    {
      "id": "attsw9AsCqvo7U6Eq",
      "url": "https://dl.airtable.com/.attachments/719d5e4500f9dfb362690fc4629a6977/02d3d76a/WA003_Risk_Assessment.docx",
      "filename": "WA003_Risk_Assessment.docx",
      "size": 20839,
      "type": "application/vnd.openxmlformats-officedocument.wordprocessingml.document",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/attsw9AsCqvo7U6Eq-b9443c0c3ea4116d-32x32.jpg",
          "width": 32,
          "height": 32
        },
        "large": {
          "url": "https://dl.airtable.com/attsw9AsCqvo7U6Eq-444da76fd5828fda-247x320.jpg",
          "width": 247,
          "height": 320
        }
      }
    }
  ],
  "BOM": [
    "recx8syrx2Mmtmba4"
  ],
  "Test Plan": [
    "rec3rcT9TElxymKFA"
  ],
  "Catalogue Image": [
    {
      "id": "attKf6hriCwP8cIDz",
      "width": 2992,
      "height": 2992,
      "url": "https://dl.airtable.com/.attachments/0f5d7f70dc1f4b760f088f4e073772b2/37259756/WA003_Catalog.JPG",
      "filename": "WA003_Catalog.JPG",
      "size": 1803797,
      "type": "image/jpeg",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/e243401b31c34b14d09a32efde2a29f5/17ea0da1",
          "width": 36,
          "height": 36
        },
        "large": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/201eb38f1be1ed9581b1eb96431006da/36039222",
          "width": 512,
          "height": 512
        },
        "full": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/b85ec27c9c597180f95ff54eb2d5daa7/76010bfa",
          "width": 3000,
          "height": 3000
        }
      }
    }
  ],
  "Production cost (USD) Qty 10": 85.82,
  "Critical Tool": "3D Printer",
  "Download Link": "http://www.thingiverse.com/thing:2464309",
  "Licence": "CC-BY-4.0",
  "User Readiness": "5",
  "RPN (Highest)": 15,
  "Open Hardware Licence": "CERN",
  "OSHWA Certification": "2019-11-08",
  "Production time (1 unit by 1 person)": "1-2 hours",
  "Email": "ben.savonen@gmail.com",
  "CAD Image": [
    {
      "id": "attTBW6ag9KPhZQIc",
      "width": 628,
      "height": 472,
      "url": "https://dl.airtable.com/.attachments/c581e5f669d89523316c17f2a1b31717/c56dc11f/WA003_Image_CAD.jpg",
      "filename": "WA003_Image_CAD.jpg",
      "size": 46353,
      "type": "image/jpeg",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/7e52fe0ff992cb256792cd98dbee26dd/d03db372",
          "width": 48,
          "height": 36
        },
        "large": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/b7e097fea353577b274f8d91a7cbee83/77f0626d",
          "width": 628,
          "height": 472
        },
        "full": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/899d38d2a5e5d6c75be31a879cb433e0/0f069f45",
          "width": 3000,
          "height": 3000
        }
      }
    }
  ],
  "Risk Readiness": "3",
  "Description": "Tightens interlocking threaded collars onto a a water input hose for a compressor ",
  "Designer": "Ben Savonen",
  "Maker Readiness": "4",
  "FAI": [
    "recPlknt1grya3hdl"
  ],
  "Catalogue Notes": "Purpose: Used to tighten interlocking threaded collars onto a water input hose for a compressor. \n\nUsage Notes: Test if sufficiently flexible by applying force to one side of the \"C\" until the threads are offset from one another by one whole thread. Test for fit by placing it over water input hose and place into interlocking threaded collars.",
  "images": [
    {
      "original": "/images/WA003-attKf6hriCwP8cIDz-400x300.jpg",
      "thumbnail": "/images/WA003-attKf6hriCwP8cIDz-400x300.jpg",
      "projectCard": "/images/WA003-attKf6hriCwP8cIDz-290x200.jpg",
      "fullscreen": "https://dl.airtable.com/.attachments/0f5d7f70dc1f4b760f088f4e073772b2/37259756/WA003_Catalog.JPG"
    },
    {
      "original": "/images/WA003-attjOqZ8rFwxhBcwN-400x300.jpg",
      "thumbnail": "/images/WA003-attjOqZ8rFwxhBcwN-400x300.jpg",
      "projectCard": "/images/WA003-attjOqZ8rFwxhBcwN-290x200.jpg",
      "fullscreen": "https://dl.airtable.com/.attachments/7f3298d64d34957dc5f27632d8a440a4/5321e1ff/WA003_Image_Use.jpg"
    },
    {
      "original": "/images/WA003-attTBW6ag9KPhZQIc-400x300.jpg",
      "thumbnail": "/images/WA003-attTBW6ag9KPhZQIc-400x300.jpg",
      "projectCard": "/images/WA003-attTBW6ag9KPhZQIc-290x200.jpg",
      "fullscreen": "https://dl.airtable.com/.attachments/c581e5f669d89523316c17f2a1b31717/c56dc11f/WA003_Image_CAD.jpg"
    }
  ]
}