Ventilator Connector

HL010

{
  "Field Readiness ": "4",
  "User Manual": {
    "FR Portfolio": [
      "receVYf4IPhkwQcwq"
    ],
    "Part No._UM": "UM_HL010",
    "What is your name?": "Aziz Wadi",
    "Step 1 Text": "Insert the ventilator connector into the ventilator flexible such that flexible goes into the gap of inner and outer wall of ventilator connector",
    "Step 2 Text": "Push the flexible inside the ventilator connector to the end to attach firmly.",
    "What is the date?": "2019-10-13",
    "What is your email address?": "aziz.wadi@fieldready.org"
  },
  "Notes": "Complete",
  "Materials": "ABS Plastic",
  "Qty produced": 1,
  "Maker": "Abi Bush",
  "Eng Dwg": [
    {
      "id": "att1pGufJ3JIzeFDp",
      "url": "https://dl.airtable.com/.attachments/c297e0b50895a70ef7f4cad835cf398b/55cddbf7/HL010_Eng_Dwg.PDF",
      "filename": "HL010_Eng_Dwg.PDF",
      "size": 51407,
      "type": "application/pdf",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/26ac54ab4003a1bdb369e56974d7c28a/fe141766",
          "width": 51,
          "height": 36
        },
        "large": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/6a5d1beed61ebc2aa29f328224b67106/7bff10ed",
          "width": 512,
          "height": 362
        }
      }
    },
    {
      "id": "attSvx7poa2ZmZfXz",
      "url": "https://dl.airtable.com/.attachments/9a6b24137292d2c327f4bd6e612bd7b8/14a307c5/HL010_Eng_Dwg.SLDDRW",
      "filename": "HL010_Eng_Dwg.SLDDRW",
      "size": 266987,
      "type": "application/octet-stream"
    }
  ],
  "Name": "Ventilator Connector ",
  "Risk Assessment": [
    "recVZpts6QIC5PLHG"
  ],
  "Location": "Nepal",
  "Part No.": "HL010",
  "Production cost (USD) Qty 1": 5.5,
  "Approved": "n/a",
  "In use Image": [
    {
      "id": "attUTl1oZRGrlkaNB",
      "width": 628,
      "height": 472,
      "url": "https://dl.airtable.com/.attachments/31803d8291eddb0b56b997ee64fbe868/aa44e379/HL010_Image_Use.jpg",
      "filename": "HL010_Image_Use.jpg",
      "size": 53325,
      "type": "image/jpeg",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/0a7c813ba311a4fcffa9ba4db6c0b7dc/7e0772f2",
          "width": 48,
          "height": 36
        },
        "large": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/8d9cb1df497c5279c119f21d3b67658e/3c95591e",
          "width": 628,
          "height": 472
        },
        "full": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/372c67b5d9375ae8a57510900c359650/f08b99f5",
          "width": 3000,
          "height": 3000
        }
      }
    }
  ],
  "Production cost (USD) Qty 100": 549.75,
  "Maker Manual": {
    "MM_Part No.": "MM_HL010",
    "Step 2 Text": "Open using a slicing software and prepare for 3D printing. Use printing settings below (settings may change for different 3D printer brands and filament manufacturers)\n\nLayer Height: 0.20 mm\nLine Width: 0.35 mm\n\nWall Thickness: 1.05 mm\nTop/Bottom Thickness: 1.0 mm\n\nInfill Density: 99%\nInfill Pattern: Strong 3D\n\nPrinting Temperature: 240 °C\nBuild Plate Temperature: 80 °C\nFlow: 100%\nEnable Retraction: Yes\nRetraction Distance: 6.5 mm\nRetraction Speed: 25 mm/s\n\nPrint Speed: 60 mm/s\n\nEnable Print Cooling: Yes\nFan Speed: 5%\n\nSupport: No\n\nBuild Plate Adhesion Type: None",
    "What is your email address?": "aziz.wadi@fieldready.org",
    "What is your name?": "Aziz Wadi",
    "Step 4 Text": "If there is any, remove support and/or adhesion structure from printed part using a small cutter.",
    "Step 3 Image": [
      {
        "id": "attn1CcKSnJb8Z7Dh",
        "width": 2488,
        "height": 1005,
        "url": "https://dl.airtable.com/.attachments/436a54ca992c81f252ffb38ef24bd643/b2655d2f/HL010_Print_Position.png",
        "filename": "HL010_Print_Position.png",
        "size": 1009739,
        "type": "image/png",
        "thumbnails": {
          "small": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/e3303bf68f7f35260aeb5c43528c5775/9b172a1e",
            "width": 89,
            "height": 36
          },
          "large": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/389a52ddc682d42025d248cdb9a04f29/beac91e7",
            "width": 1268,
            "height": 512
          },
          "full": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/abc932260ea2f0c7af609c8008f639d1/f0cbe280",
            "width": 3000,
            "height": 3000
          }
        }
      }
    ],
    "Production time": "75 minutes",
    "FR Portfolio": [
      "receVYf4IPhkwQcwq"
    ],
    "Step 1": "Download the STL file from CAD files.",
    "Step 3 Text": "3D print product positioned as shown.",
    "Material used": "ABS filament",
    "Tools used": "3D slicing software\n3D printer",
    "Step 5 Text": "Consider using chemical treatments on the 3D-printed parts (Acetone vapor) in order to remove the gaps between layers and smooth the surface.",
    "What is the date?": "2019-10-13"
  },
  "Version": 1,
  "Start Date ": "2016-06-10",
  "CAD": [
    {
      "id": "attEfVVM4BL4sBMDA",
      "url": "https://dl.airtable.com/.attachments/97383220ed8a7620604597247d42c467/59f7a353/HL010_CAD.sldprt",
      "filename": "HL010_CAD.sldprt",
      "size": 68096,
      "type": "application/octet-stream"
    },
    {
      "id": "attvPEJrvrh9u8Erj",
      "url": "https://dl.airtable.com/.attachments/066ee42cd7437380dd01e77df664c0fb/70cdaeb8/HL010_CAD.stl",
      "filename": "HL010_CAD.stl",
      "size": 2567284,
      "type": "application/vnd.ms-pki.stl"
    }
  ],
  "OSHWA UID": "US000211",
  "Tech Readiness": "4",
  "End Date ": "2016-06-10",
  "BOM": [
    "recky6clcTyptRTAs"
  ],
  "Test Plan": [
    "recJV9pOZVGvCYnu7"
  ],
  "Catalogue Image": [
    {
      "id": "attiKpfN8ca9OvT7w",
      "width": 2992,
      "height": 2992,
      "url": "https://dl.airtable.com/.attachments/f1e49c79ff3006d0bc32f39c9ee672cf/d5382d58/HL010_Catalog.JPG",
      "filename": "HL010_Catalog.JPG",
      "size": 1927764,
      "type": "image/jpeg",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/2f486837320c9dc9ea5f8c25794b9cf2/c682b6ab",
          "width": 36,
          "height": 36
        },
        "large": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/924bf73350bbfefe16b1127d787de168/528cfa9b",
          "width": 512,
          "height": 512
        },
        "full": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/c7b7bcbb77e2a0b035fa91e5c6f26dca/9f8dbc87",
          "width": 3000,
          "height": 3000
        }
      }
    }
  ],
  "Production cost (USD) Qty 10": 54.98,
  "Critical Tool": "3D Printer",
  "Download Link": "http://www.thingiverse.com/thing:1618837",
  "Licence": "CC-BY-4.0",
  "User Readiness": "4",
  "RPN (Highest)": 9,
  "Open Hardware Licence": "CERN",
  "OSHWA Certification": "2020-01-03",
  "Production time (1 unit by 1 person)": "1-2 hours",
  "CAD Image": [
    {
      "id": "attwtWmtiEwJa5w3E",
      "width": 628,
      "height": 472,
      "url": "https://dl.airtable.com/.attachments/3d8fdaea67f38e8581225d76bf10042d/f01e658b/HL010_Image_CAD.jpg",
      "filename": "HL010_Image_CAD.jpg",
      "size": 36923,
      "type": "image/jpeg",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/a170a52de89d8be661fc16016710f3fc/a86d9028",
          "width": 48,
          "height": 36
        },
        "large": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/104bc01905bbffc7eb77f1832c1d16db/0770cc11",
          "width": 628,
          "height": 472
        },
        "full": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/e258bd9fc20164908617bc7789a546d3/572e174f",
          "width": 3000,
          "height": 3000
        }
      }
    }
  ],
  "Risk Readiness": "3",
  "Description": "Connector for ventilator",
  "Designer": "Abi Bush",
  "Maker Readiness": "3",
  "FAI": [
    "reckuiy85R4KnJ380"
  ],
  "Catalogue Notes": "Size: 3.3 cm x 2.2 cm x 4.6 cm\n \nUsage Notes: Print vertically in orientation shown in picture for no support. Best to use slightly high temperature than usual, to help layers bond together, and if only printing one part use a slow speed to allow layers to cool enough before next layer printed (fast print speed can lead to warped layers). If for medical use, please print in food-grade PET. \n",
  "images": [
    {
      "original": "/images/HL010-attiKpfN8ca9OvT7w-400x300.jpg",
      "thumbnail": "/images/HL010-attiKpfN8ca9OvT7w-400x300.jpg",
      "projectCard": "/images/HL010-attiKpfN8ca9OvT7w-290x200.jpg",
      "fullscreen": "https://dl.airtable.com/.attachments/f1e49c79ff3006d0bc32f39c9ee672cf/d5382d58/HL010_Catalog.JPG"
    },
    {
      "original": "/images/HL010-attUTl1oZRGrlkaNB-400x300.jpg",
      "thumbnail": "/images/HL010-attUTl1oZRGrlkaNB-400x300.jpg",
      "projectCard": "/images/HL010-attUTl1oZRGrlkaNB-290x200.jpg",
      "fullscreen": "https://dl.airtable.com/.attachments/31803d8291eddb0b56b997ee64fbe868/aa44e379/HL010_Image_Use.jpg"
    },
    {
      "original": "/images/HL010-attwtWmtiEwJa5w3E-400x300.jpg",
      "thumbnail": "/images/HL010-attwtWmtiEwJa5w3E-400x300.jpg",
      "projectCard": "/images/HL010-attwtWmtiEwJa5w3E-290x200.jpg",
      "fullscreen": "https://dl.airtable.com/.attachments/3d8fdaea67f38e8581225d76bf10042d/f01e658b/HL010_Image_CAD.jpg"
    }
  ]
}