{
  "Part No.": "HL017",
  "Name": "Bottle Cap Sharps ",
  "Description": "To dispose of sharp items",
  "Start Date ": "2018-02-23",
  "End Date ": "2018-02-23",
  "Field Readiness ": "4",
  "Maker Readiness": "3",
  "User Readiness": "4",
  "Tech Readiness": "4",
  "Risk Readiness": "3",
  "Approved": "n/a",
  "RPN (Highest)": 16,
  "Designer": "Tom van der Vaart",
  "Maker": "Tom van der Vaart",
  "Location": "Nepal",
  "Licence": "CC-BY-4.0",
  "Version": 1,
  "Production cost (USD) Qty 1": 9.1,
  "Production cost (USD) Qty 10": 90.99,
  "Production cost (USD) Qty 100": 909.92,
  "CAD Image": [
    {
      "id": "attW3iGzDkpdUY2Yb",
      "width": 628,
      "height": 472,
      "url": "https://dl.airtable.com/.attachments/0e040b8c7d5b063e1fe6147a2158d201/06259dcd/HL017_Image_CAD.jpg",
      "filename": "HL017_Image_CAD.jpg",
      "size": 41025,
      "type": "image/jpeg",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/c5fe266d258ce25d7d0cfc3e8eb85e1a/9dc3a78a",
          "width": 48,
          "height": 36
        },
        "large": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/2dd75e272efad14386b518f5d9694631/a27dca03",
          "width": 628,
          "height": 472
        },
        "full": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/da5a4904b51f6bfc45b9ad5a322256ce/c91d43c7",
          "width": 3000,
          "height": 3000
        }
      }
    }
  ],
  "In use Image": [
    {
      "id": "attgRjfVDJAwQBavG",
      "width": 3264,
      "height": 2448,
      "url": "https://dl.airtable.com/.attachments/aa3b9744c061739581fadcf1c3a639fe/f0c23ad6/HL017_Image_Use.JPG",
      "filename": "HL017_Image_Use.JPG",
      "size": 1553454,
      "type": "image/jpeg",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/8c40b99f4dce031ad4d83492af364361/aeb043fe",
          "width": 27,
          "height": 36
        },
        "large": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/e7357921848b79afed087acd1eed07a7/a90818ee",
          "width": 512,
          "height": 683
        },
        "full": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/896a45e18dd42391c2449bd02a56e5ff/3aad849c",
          "width": 3000,
          "height": 3000
        }
      }
    }
  ],
  "Catalogue Image": [
    {
      "id": "attvmxjzgSvIoCdjO",
      "width": 2992,
      "height": 2992,
      "url": "https://dl.airtable.com/.attachments/96fe49fb32009684e880ab3333e96d3c/ee9c203e/HL017_Image_Catalogue.JPG",
      "filename": "HL017_Image_Catalogue.JPG",
      "size": 1608489,
      "type": "image/jpeg",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/11838e043dd1cb23d6dbc1e01fa7c56c/c1f4286f",
          "width": 36,
          "height": 36
        },
        "large": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/bb92e5a272b7e1c4b1a4b095448a3f2c/5a5cbb0e",
          "width": 512,
          "height": 512
        },
        "full": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/9f708b8a0923a071788ef7e0c534005e/607ed2c5",
          "width": 3000,
          "height": 3000
        }
      }
    }
  ],
  "Eng Dwg": [
    {
      "id": "attIXv7SdH00HzOD6",
      "url": "https://dl.airtable.com/.attachments/00a062e450944ed4fa61771c11c06c44/b85465e8/HL017_Eng_Dwg_Upper.PDF",
      "filename": "HL017_Eng_Dwg_Upper.PDF",
      "size": 79248,
      "type": "application/pdf",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/7a5f498aee4ceb571ab26dcb57a47268/7f914aad",
          "width": 51,
          "height": 36
        },
        "large": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/58a7ab13df1141cc3df9cd049da65709/61036bd0",
          "width": 512,
          "height": 362
        }
      }
    },
    {
      "id": "att0BzxVCEWgWICBn",
      "url": "https://dl.airtable.com/.attachments/0c0020d391d4eb16e26b9d17af71fe7f/462e9449/HL017_Eng_Dwg_Lower.PDF",
      "filename": "HL017_Eng_Dwg_Lower.PDF",
      "size": 91029,
      "type": "application/pdf",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/701cb2378052343bdb139864bf7e5c50/49cc7c3e",
          "width": 51,
          "height": 36
        },
        "large": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/5dc1a6d0b0d7acc8a10f736fe2c30dc8/8a45db41",
          "width": 512,
          "height": 362
        }
      }
    },
    {
      "id": "att2mZWwtyBM9OCW0",
      "url": "https://dl.airtable.com/.attachments/73060bdfeee24ddc9df349e9fe7fcce5/a9b6c110/HL017_Eng_Dwg_Lower.SLDDRW",
      "filename": "HL017_Eng_Dwg_Lower.SLDDRW",
      "size": 629564,
      "type": "text/plain"
    },
    {
      "id": "att5vdUNOqA61VBzy",
      "url": "https://dl.airtable.com/.attachments/975c9c4b81035e5d88b3e033803973a0/3974a741/HL017_Eng_Dwg_Upper.SLDDRW",
      "filename": "HL017_Eng_Dwg_Upper.SLDDRW",
      "size": 782389,
      "type": "text/plain"
    }
  ],
  "CAD": [
    {
      "id": "attmtg2sC6QhnJ3Xm",
      "url": "https://dl.airtable.com/.attachments/17ff7d4722170907f1c81aff3276ce5b/8da33431/HL017_CAD_Lower.SLDPRT",
      "filename": "HL017_CAD_Lower.SLDPRT",
      "size": 1431015,
      "type": "application/octet-stream"
    },
    {
      "id": "attdq4ZmbwJxS4DcN",
      "url": "https://dl.airtable.com/.attachments/9f7c6f7274923ff945ebe7113b9951d1/c75dd39f/HL017_CAD_Lower.STL",
      "filename": "HL017_CAD_Lower.STL",
      "size": 1003011,
      "type": "application/octet-stream"
    },
    {
      "id": "attzvAgkRYNTmtYWz",
      "url": "https://dl.airtable.com/.attachments/05a6116f1777d50dda61b4c0bb42bab6/e4b4acb3/HL017_CAD_Upper.STL",
      "filename": "HL017_CAD_Upper.STL",
      "size": 1305581,
      "type": "application/octet-stream"
    },
    {
      "id": "attaenu3ZFIe3rsWh",
      "url": "https://dl.airtable.com/.attachments/37cf5ce4980a070363909c0b8abbbe13/a679faa3/HL017_CAD_Upper.SLDPRT",
      "filename": "HL017_CAD_Upper.SLDPRT",
      "size": 1836764,
      "type": "application/octet-stream"
    }
  ],
  "Test Plan [REF]": [
    {
      "id": "attAPbXPFW3lAs5Uy",
      "url": "https://dl.airtable.com/.attachments/7162c3521fce44e3922e1fa00db61728/9ed5627d/HL017_Testing.docx",
      "filename": "HL017_Testing.docx",
      "size": 347190,
      "type": "application/vnd.openxmlformats-officedocument.wordprocessingml.document",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/attAPbXPFW3lAs5Uy-1f1f177b5cf23fd9-32x32.jpg",
          "width": 32,
          "height": 32
        },
        "large": {
          "url": "https://dl.airtable.com/attAPbXPFW3lAs5Uy-fd095c653aec404f-247x320.jpg",
          "width": 247,
          "height": 320
        }
      }
    }
  ],
  "Maker Manual [REF]": [
    {
      "id": "attsCiHmAXllxkMHj",
      "url": "https://dl.airtable.com/.attachments/99a616d54c28652cc5d147cb9bbd801e/3f9d0ae6/HL017_Manual.pdf",
      "filename": "HL017_Manual.pdf",
      "size": 630530,
      "type": "application/pdf",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/80e2f08d14fe7a578ce3503e7bd9c0c4/6de0e338",
          "width": 64,
          "height": 36
        },
        "large": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/c01cb0282316865e93ac656a0178b0b9/118612e7",
          "width": 512,
          "height": 288
        }
      }
    }
  ],
  "Critical Tool": "3D Printer",
  "Maker Manual": {
    "MM_Part No.": "MM_HL017",
    "Step 2 Text": "Open using a slicing software and prepare for 3D printing. Use printing settings below (settings may change for different 3D printer brands and filament manufacturers)\n\nLayer Height: 0.20 mm\nLine Width: 0.35 mm\n\nWall Thickness: 1.05 mm\nTop/Bottom Thickness: 1.0 mm\n\nInfill Density: 60%\nInfill Pattern: Strong 3D\n\nPrinting Temperature: 240 °C\nBuild Plate Temperature: 80 °C\nFlow: 100%\nEnable Retraction: Yes\nRetraction Distance: 6.5 mm\nRetraction Speed: 25 mm/s\n\nPrint Speed: 60 mm/s\n\nEnable Print Cooling: Yes\nFan Speed: 5%\n\nSupport: Yes\nSupport Placement: Everywhere\nSupport Overhang Angel: 60°\n\nBuild Plate Adhesion Type: None",
    "Step 3 Text": "3D print product positioned as shown.",
    "FR Portfolio": [
      "recwztcyfEz66t12W"
    ],
    "What is your name?": "Aziz Wadi",
    "Step 3 Image": [
      {
        "id": "attzhN4uaTIj8hAoC",
        "width": 1193,
        "height": 496,
        "url": "https://dl.airtable.com/.attachments/65bc6a9ab2953ffbe285d06fe6856e56/e3e7b489/HL017_Image_Position.png",
        "filename": "HL017_Image_Position.png",
        "size": 283291,
        "type": "image/png",
        "thumbnails": {
          "small": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/48743d18f3d603909e05638dc4617153/25b80033",
            "width": 87,
            "height": 36
          },
          "large": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/78ebd4daced8e2181045daa3a9ed8f8c/bdfb4250",
            "width": 1193,
            "height": 496
          },
          "full": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/11779fada0a0ab4a94f70d863d586bd7/f7e004a2",
            "width": 3000,
            "height": 3000
          }
        }
      }
    ],
    "What is your email address?": "aziz.wadi@fieldready.org",
    "What is the date?": "2020-02-06",
    "Tools used": "3D slicing software\n3D printer",
    "Material used": "ABS filament",
    "Production time": "160 minutes",
    "Step 1": "Download the STL file from CAD files.",
    "Step 4 Text": "If there is any, remove support and/or adhesion structure from printed part using a small cutter.",
    "Step 5 Text": "Consider using chemical treatments on the 3D-printed parts (Acetone vapor) in order to remove the gaps between layers and smooth the surface."
  },
  "Risk Assessment": [
    "recNpfsJffpMfxI28"
  ],
  "User Manual": {
    "Part No._UM": "UM_HL017",
    "Step 2 Text": "Push to the end till the upper part clicks and firmly attached to bottle threads. ",
    "Step 1 Text": "Insert the upper part from its pointing side into a plastic bottle opening.",
    "FR Portfolio": [
      "recwztcyfEz66t12W"
    ],
    "What is your name?": "Aziz Wadi",
    "What is your email address?": "aziz.wadi@fieldready.org",
    "What is the date?": "2020-02-06",
    "Step 4 Text": "Push the lower part into the upper part till it clicks. Now disposals are secure inside. ",
    "Step 3 Text": "Use the hole in the upper side to dispose medical sharps."
  },
  "Test Plan": [
    "recwP7z3ot1r5IaqR"
  ],
  "BOM": [
    "recTwblPxYhc2kSuT"
  ],
  "FAI": [
    "recUSLCTgN5Dw7cOx"
  ],
  "Notes": "Complete",
  "OSHWA Certification": "2020-02-16",
  "OSHWA UID": "US000219",
  "Production time (1 unit by 1 person)": "2-3 hours",
  "Materials": "PET bottle & ABS Plastic",
  "Open Hardware Licence": "CERN",
  "images": [
    {
      "original": "/images/HL017-attvmxjzgSvIoCdjO-400x300.jpg",
      "thumbnail": "/images/HL017-attvmxjzgSvIoCdjO-400x300.jpg",
      "projectCard": "/images/HL017-attvmxjzgSvIoCdjO-290x200.jpg",
      "fullscreen": "https://dl.airtable.com/.attachments/96fe49fb32009684e880ab3333e96d3c/ee9c203e/HL017_Image_Catalogue.JPG"
    },
    {
      "original": "/images/HL017-attgRjfVDJAwQBavG-400x300.jpg",
      "thumbnail": "/images/HL017-attgRjfVDJAwQBavG-400x300.jpg",
      "projectCard": "/images/HL017-attgRjfVDJAwQBavG-290x200.jpg",
      "fullscreen": "https://dl.airtable.com/.attachments/aa3b9744c061739581fadcf1c3a639fe/f0c23ad6/HL017_Image_Use.JPG"
    },
    {
      "original": "/images/HL017-attW3iGzDkpdUY2Yb-400x300.jpg",
      "thumbnail": "/images/HL017-attW3iGzDkpdUY2Yb-400x300.jpg",
      "projectCard": "/images/HL017-attW3iGzDkpdUY2Yb-290x200.jpg",
      "fullscreen": "https://dl.airtable.com/.attachments/0e040b8c7d5b063e1fe6147a2158d201/06259dcd/HL017_Image_CAD.jpg"
    }
  ]
}