{
  "Part No.": "HL022",
  "Name": "Body Fat Calliper",
  "Description": "To measure body fat",
  "Start Date ": "2018-02-19",
  "End Date ": "2018-02-19",
  "Field Readiness ": "4",
  "Maker Readiness": "3",
  "User Readiness": "4",
  "Tech Readiness": "3",
  "Risk Readiness": "5",
  "Approved": "n/a",
  "RPN (Highest)": 8,
  "Designer": "Tom van der Vaart",
  "Maker": "Tom van der Vaart",
  "Location": "Nepal",
  "Licence": "CC-BY-4.0",
  "Qty produced": 3,
  "Version": 3,
  "Production cost (USD) Qty 1": 8.06,
  "Production cost (USD) Qty 10": 80.59,
  "Production cost (USD) Qty 100": 805.92,
  "CAD Image": [
    {
      "id": "attKA5J2mueQaCHEU",
      "width": 628,
      "height": 472,
      "url": "https://dl.airtable.com/.attachments/5499bb0fba1f93083603ea2a2d456bd7/a53df700/HL022_Image_CAD.jpg",
      "filename": "HL022_Image_CAD.jpg",
      "size": 47916,
      "type": "image/jpeg",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/862c8ac19ca5a047b87519b83bb0a5fa/0138c02e",
          "width": 48,
          "height": 36
        },
        "large": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/83de0454376444c62ccbd7b2ed6a3e98/0bf1b3c1",
          "width": 628,
          "height": 472
        },
        "full": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/ada9ed4d867087d41bac77f3317fa485/4f24ab00",
          "width": 3000,
          "height": 3000
        }
      }
    }
  ],
  "In use Image": [
    {
      "id": "attzAsvt5FExCiZ48",
      "width": 3264,
      "height": 2448,
      "url": "https://dl.airtable.com/.attachments/716247eccb4bc39b1e6ce4a397ba1324/9575ea18/HL022_Image_Use.JPG",
      "filename": "HL022_Image_Use.JPG",
      "size": 1550168,
      "type": "image/jpeg",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/b6a9e7d2188ece95ef23f92f75f20572/e2d80916",
          "width": 48,
          "height": 36
        },
        "large": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/ca459bd5221fc0dfdd117a9004905abb/2591b95b",
          "width": 683,
          "height": 512
        },
        "full": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/858752aef2988fb755e82522cc3569d7/d6d0233a",
          "width": 3000,
          "height": 3000
        }
      }
    }
  ],
  "Catalogue Image": [
    {
      "id": "attsZY6vQ53HP6wfC",
      "width": 2992,
      "height": 2992,
      "url": "https://dl.airtable.com/.attachments/75ad50bc7fd13dc1ba156c4ddbf884da/62ea65f0/HL022_Image_Catalogue.JPG",
      "filename": "HL022_Image_Catalogue.JPG",
      "size": 1759403,
      "type": "image/jpeg",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/bd3d4c3357ba6632ea9fe87429e5214d/98ad72b4",
          "width": 36,
          "height": 36
        },
        "large": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/8f66a86aa665e6175871d3080bf0f385/2cf9fc32",
          "width": 512,
          "height": 512
        },
        "full": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/71002416d8ec7907216fb47e1f5a0996/0118335f",
          "width": 3000,
          "height": 3000
        }
      }
    }
  ],
  "Eng Dwg": [
    {
      "id": "att8ITPyC5PgqJj95",
      "url": "https://dl.airtable.com/.attachments/aa7c4ebaa32bcea293b1ee7a76743827/689ccc02/HL022_Eng_Dwg_SideB.PDF",
      "filename": "HL022_Eng_Dwg_SideB.PDF",
      "size": 84315,
      "type": "application/pdf",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/06941a26c23b688285b48fdb4fbb1828/88f03bdf",
          "width": 51,
          "height": 36
        },
        "large": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/8f9138828df60fafb936ea193ce15e37/5c45ac30",
          "width": 512,
          "height": 362
        }
      }
    },
    {
      "id": "att6s2Jn38yHcvfzE",
      "url": "https://dl.airtable.com/.attachments/dc4b31102f25569d26c7d3bdab9dcb35/14db365f/HL022_Eng_Dwg_SideA.PDF",
      "filename": "HL022_Eng_Dwg_SideA.PDF",
      "size": 73713,
      "type": "application/pdf",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/989cd6a411858c2e38243ffba0c45d5f/ff7098f2",
          "width": 51,
          "height": 36
        },
        "large": {
          "url": "https://dl.airtable.com/.attachmentThumbnails/885a9cca9d7a24a91b080c4332baefed/e0af636c",
          "width": 512,
          "height": 362
        }
      }
    },
    {
      "id": "attG9cxUk1nZw3BlN",
      "url": "https://dl.airtable.com/.attachments/a7c0bb362f2b55d01bdbe195a5818eb3/5ba6f3d5/HL022_Eng_Dwg_SideA.SLDDRW",
      "filename": "HL022_Eng_Dwg_SideA.SLDDRW",
      "size": 241774,
      "type": "text/plain"
    },
    {
      "id": "atthCW0Qeem9aG6ss",
      "url": "https://dl.airtable.com/.attachments/4b48abc8a913b19dd99ab9febc09ecc1/50815fee/HL022_Eng_Dwg_SideB.SLDDRW",
      "filename": "HL022_Eng_Dwg_SideB.SLDDRW",
      "size": 876286,
      "type": "text/plain"
    }
  ],
  "CAD": [
    {
      "id": "attZZJXP2NmoOmLVZ",
      "url": "https://dl.airtable.com/.attachments/283079fa7a01d671bdce2d3bd7b86209/7dc5723f/HL022_CAD_SideA.SLDPRT",
      "filename": "HL022_CAD_SideA.SLDPRT",
      "size": 277573,
      "type": "application/octet-stream"
    },
    {
      "id": "attwxQ0elhHsmsAxc",
      "url": "https://dl.airtable.com/.attachments/8e72350c485a0eebeff40efb5ddffe0b/1407e3b3/HL022_CAD_SideA.STL",
      "filename": "HL022_CAD_SideA.STL",
      "size": 191425,
      "type": "application/octet-stream"
    },
    {
      "id": "attjXtgk23sBpLi00",
      "url": "https://dl.airtable.com/.attachments/678693d8616b6feaa863b48ed672ed87/f6d5f746/HL022_CAD_SideB.STL",
      "filename": "HL022_CAD_SideB.STL",
      "size": 1760820,
      "type": "application/octet-stream"
    },
    {
      "id": "attnAbuN6AXegGu9V",
      "url": "https://dl.airtable.com/.attachments/8051035f2b01c02d3f6c5b10ba391c51/4fde99d7/HL022_CAD_SideB.SLDPRT",
      "filename": "HL022_CAD_SideB.SLDPRT",
      "size": 2230032,
      "type": "application/octet-stream"
    }
  ],
  "Test Plan [REF]": [
    {
      "id": "att00FwXojLwMnhf6",
      "url": "https://dl.airtable.com/.attachments/1faf4370a3c02b787f57c03de0134621/f261f342/HL022_Testing.docx",
      "filename": "HL022_Testing.docx",
      "size": 314961,
      "type": "application/vnd.openxmlformats-officedocument.wordprocessingml.document",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/att00FwXojLwMnhf6-8237d8dc1f520e3e-32x32.jpg",
          "width": 32,
          "height": 32
        },
        "large": {
          "url": "https://dl.airtable.com/att00FwXojLwMnhf6-118b393511b91c68-247x320.jpg",
          "width": 247,
          "height": 320
        }
      }
    }
  ],
  "Maker Manual [REF]": [
    {
      "id": "att6qM3huB5OZo31U",
      "url": "https://dl.airtable.com/.attachments/05fdfa9ec1a96867710e6400f81caa27/347fe6fe/HL022_Manual.docx",
      "filename": "HL022_Manual.docx",
      "size": 555787,
      "type": "application/vnd.openxmlformats-officedocument.wordprocessingml.document",
      "thumbnails": {
        "small": {
          "url": "https://dl.airtable.com/att6qM3huB5OZo31U-2c051b8aa3fec314-32x32.jpg",
          "width": 32,
          "height": 32
        },
        "large": {
          "url": "https://dl.airtable.com/att6qM3huB5OZo31U-68a032d7ada5d108-247x320.jpg",
          "width": 247,
          "height": 320
        }
      }
    }
  ],
  "Critical Tool": "3D Printer",
  "Maker Manual": {
    "MM_Part No.": "MM_HL022",
    "Step 2 Text": "Open using a slicing software and prepare for 3D printing. Use printing settings below (settings may change for different 3D printer brands and filament manufacturers)\n\nLayer Height: 0.20 mm\nLine Width: 0.35 mm\n\nWall Thickness: 1.05 mm\nTop/Bottom Thickness: 1.0 mm\n\nInfill Density: 60%\nInfill Pattern: Flexible 3D\n\nPrinting Temperature: 240 °C\nBuild Plate Temperature: 80 °C\nFlow: 100%\nEnable Retraction: Yes\nRetraction Distance: 6.5 mm\nRetraction Speed: 25 mm/s\n\nPrint Speed: 60 mm/s\n\nEnable Print Cooling: Yes\nFan Speed: 5%\n\nSupport: Yes\nSupport Placement: Everywhere\nSupport Overhang Angel: 60°\n\nBuild Plate Adhesion Type: None",
    "Step 3 Text": "3D print product positioned as shown.",
    "FR Portfolio": [
      "recv1mF6EyuhrgGZE"
    ],
    "What is your name?": "Aziz Wadi",
    "Step 3 Image": [
      {
        "id": "att9OUhtj8lba2wCR",
        "width": 1155,
        "height": 417,
        "url": "https://dl.airtable.com/.attachments/fe1d926b4585a92662dfd7972ca60b3c/4115c853/HL022_Image_Position.png",
        "filename": "HL022_Image_Position.png",
        "size": 295867,
        "type": "image/png",
        "thumbnails": {
          "small": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/63112950f3710eed9cf93c4032a627da/be2a6c10",
            "width": 100,
            "height": 36
          },
          "large": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/2dd40009095c392f4241c0d050e2eb89/b4addf4c",
            "width": 1155,
            "height": 417
          },
          "full": {
            "url": "https://dl.airtable.com/.attachmentThumbnails/2c813300412426cfada9c0db24e9f673/255b2d76",
            "width": 3000,
            "height": 3000
          }
        }
      }
    ],
    "What is your email address?": "aziz.wadi@fieldready.org",
    "What is the date?": "2020-02-06",
    "Tools used": "3D slicing software\n3D printer",
    "Material used": "ABS filament",
    "Production time": "135 minutes",
    "Step 1": "Download the STL file from CAD files.",
    "Step 4 Text": "If there is any, remove support and/or adhesion structure from printed part using a small cutter.",
    "Step 5 Text": "Consider using chemical treatments on the 3D-printed parts (Acetone vapor) in order to remove the gaps between layers and smooth the surface."
  },
  "Risk Assessment": [
    "rec2eKG29mb9MQVlB"
  ],
  "User Manual": {
    "Part No._UM": "UM_HL022",
    "Step 2 Text": "With the calipers in your right hand place the jaws of the calipers about 1/4\"  from the fingers of your left hand.",
    "Step 1 Text": "Pull out skin with the underlying layer of fat with your left hand. It is important to keep holding with your left hand while taking measurement. ",
    "FR Portfolio": [
      "recv1mF6EyuhrgGZE"
    ],
    "What is your name?": "Aziz Wadi",
    "What is your email address?": "aziz.wadi@fieldready.org",
    "What is the date?": "2020-02-06",
    "Step 4 Text": "Use body fat percentage charts to calculate yours",
    "Step 3 Text": "Press the flexible (in SideB) with your thumb till it touches the caliper. Now take the measurement."
  },
  "Test Plan": [
    "recxNqcp46frFqebd"
  ],
  "BOM": [
    "recw1arDzOCGyyGhy"
  ],
  "FAI": [
    "reczu1JNFok8nEvSb"
  ],
  "Notes": "Complete",
  "OSHWA Certification": "2020-02-16",
  "OSHWA UID": "US000220",
  "Production time (1 unit by 1 person)": "2-3 hours",
  "Materials": "ABS Plastic",
  "Download Link": "https://www.thingiverse.com/thing:2798985",
  "Open Hardware Licence": "CERN",
  "images": [
    {
      "original": "/images/HL022-attsZY6vQ53HP6wfC-400x300.jpg",
      "thumbnail": "/images/HL022-attsZY6vQ53HP6wfC-400x300.jpg",
      "projectCard": "/images/HL022-attsZY6vQ53HP6wfC-290x200.jpg",
      "fullscreen": "https://dl.airtable.com/.attachments/75ad50bc7fd13dc1ba156c4ddbf884da/62ea65f0/HL022_Image_Catalogue.JPG"
    },
    {
      "original": "/images/HL022-attzAsvt5FExCiZ48-400x300.jpg",
      "thumbnail": "/images/HL022-attzAsvt5FExCiZ48-400x300.jpg",
      "projectCard": "/images/HL022-attzAsvt5FExCiZ48-290x200.jpg",
      "fullscreen": "https://dl.airtable.com/.attachments/716247eccb4bc39b1e6ce4a397ba1324/9575ea18/HL022_Image_Use.JPG"
    },
    {
      "original": "/images/HL022-attKA5J2mueQaCHEU-400x300.jpg",
      "thumbnail": "/images/HL022-attKA5J2mueQaCHEU-400x300.jpg",
      "projectCard": "/images/HL022-attKA5J2mueQaCHEU-290x200.jpg",
      "fullscreen": "https://dl.airtable.com/.attachments/5499bb0fba1f93083603ea2a2d456bd7/a53df700/HL022_Image_CAD.jpg"
    }
  ]
}